- Downloaded
- 16.3 GB
- Uploaded
- 1.5 TB
- Ratio
- 95.17
- Seedbonus
- 19,744
- Upload Count
- 5 (4)
Member for 3 years
Change PIN2:
Changes cannot be made from the menu, they can only be made using the following. key combinations:
**042*OldPin2*NewPin2* NewPin2#
in most cases OldPin 0000.
It is also possible to change PIN2 using the following. combinations (GSM):
**042* OldPin * NewPin 2#
or use menu 7-4-2 to enter PIN2 and then change it by pressing the left key below the screen. (soft key)
Checking the Firmware Version:
To view the firmware version, press the Menu button and then 9-8-2 and then press the left key under the screen.
Or *#06# & "green button" and left key.
Quick change of interface language:
Achieved by entering:
*#0000# & "green key" = automatic language selection
*#0001# & "green key" = English
*#0030# & "green key" = Greek
*#0031# & "green key" = Danish
*#0032# & "green key" = French
*#0034# & "green key" = Spanish
*#0039# & "green key" = Italian
*#0049# & "green key" = German
*#0090# & "green key" = Turkish
Speech encoding type:
*#3370# & "green key" = Activate Enhanced Full Rate.
The sound quality is improved while the standby time is reduced by approximately 5%!
#3370# & "green key" = disable Enhanced Full Rate
*#4720# & "green key" = Activate Half Rate Mode.
The sound quality is reduced, but the standby time is increased by up to 30%!
#4720# & "green key" = disable Half Rate Mode
Switching on the phone without a SIM card:
*#0606# & left key (soft key)
Restoring original settings:
You can reset all the changes made and get the original, original settings:
*#9999# & "green key" = Does not change settings related to network and SIM card
Tips:
Keyboard shortcuts
Voice mail (Voice mail) - Press the <1> key and hold for a few seconds
Country codes (International country codes) - Press the <0> key and then the left key
Ringer off - Press the <*> key for a few seconds.
Keyboard lock (Keylock) - Press the <#> key and hold for a few seconds.
Increasing standby time
Based on SIEMENS materials:
- 1 minute of screen backlight equals 1 hour of standby time.
- 10 seconds of menu operation corresponds to 15 minutes of standby time.
- A minute of broadcast message transmission corresponds to 30 minutes of standby time
- Connecting the phone to another base station is equal to 1 hour in standby mode
- Turning on the phone and then registering it to the network takes 2 hours from standby mode.
Battery saving settings:
1. Turn on the infrared port only if necessary - you can assign one of the programmable keys (8-4-1 or 2)
2. CB can be configured to read using one of the programmable keys (8-4-1 or 2)
3. Use backlight only when necessary (8-5-2)
4. Avoid constantly turning the phone off and then registering on the network
5. Use the vibrator only when necessary. Don't use the vibrator all the time
. 6. Disable automatic network registration (6-3)
7. The battery in the S25 is rather weak. To conserve energy, set s25 to automatically turn off every evening. You can safely turn on your phone in the morning. This option is located in the menu under the clock.
8. Temporarily turn off the backlight of the display (the keypad lock must be activated), just press the End call button (with the image of a red phone).
How can I quickly turn off the vibration alert?
The fastest way is to put the phone in professional mode (expert mode, see the instructions) and then press three keys in sequence - Menu - 3 - 5 to turn the vibration alert on or off.
______________________________________________________________________________________________________________________________
Useful Codes:
All Samsung models
*#06# IMEI number
*#9998*228# -> Battery status (capacity, voltage, temperature) *#9999# -> Shows software version
*#9998*289# -> Change ringer frequency
*#9998*523# -> Change display contrast
*#9998*842# -> Vibrator test
*2767*3855# -> Full reset l EEPROM ( This code removes SP lock!! ) But also changes IMEI to 447967-89-400044-0, To restore your old IMEI, use the appropriate software (at your own risk)
*2767*2878# -> Custom reset EEEPROM
Changes cannot be made from the menu, they can only be made using the following. key combinations:
**042*OldPin2*NewPin2* NewPin2#
in most cases OldPin 0000.
It is also possible to change PIN2 using the following. combinations (GSM):
**042* OldPin * NewPin 2#
or use menu 7-4-2 to enter PIN2 and then change it by pressing the left key below the screen. (soft key)
Checking the Firmware Version:
To view the firmware version, press the Menu button and then 9-8-2 and then press the left key under the screen.
Or *#06# & "green button" and left key.
Quick change of interface language:
Achieved by entering:
*#0000# & "green key" = automatic language selection
*#0001# & "green key" = English
*#0030# & "green key" = Greek
*#0031# & "green key" = Danish
*#0032# & "green key" = French
*#0034# & "green key" = Spanish
*#0039# & "green key" = Italian
*#0049# & "green key" = German
*#0090# & "green key" = Turkish
Speech encoding type:
*#3370# & "green key" = Activate Enhanced Full Rate.
The sound quality is improved while the standby time is reduced by approximately 5%!
#3370# & "green key" = disable Enhanced Full Rate
*#4720# & "green key" = Activate Half Rate Mode.
The sound quality is reduced, but the standby time is increased by up to 30%!
#4720# & "green key" = disable Half Rate Mode
Switching on the phone without a SIM card:
*#0606# & left key (soft key)
Restoring original settings:
You can reset all the changes made and get the original, original settings:
*#9999# & "green key" = Does not change settings related to network and SIM card
Tips:
Keyboard shortcuts
Voice mail (Voice mail) - Press the <1> key and hold for a few seconds
Country codes (International country codes) - Press the <0> key and then the left key
Ringer off - Press the <*> key for a few seconds.
Keyboard lock (Keylock) - Press the <#> key and hold for a few seconds.
Increasing standby time
Based on SIEMENS materials:
- 1 minute of screen backlight equals 1 hour of standby time.
- 10 seconds of menu operation corresponds to 15 minutes of standby time.
- A minute of broadcast message transmission corresponds to 30 minutes of standby time
- Connecting the phone to another base station is equal to 1 hour in standby mode
- Turning on the phone and then registering it to the network takes 2 hours from standby mode.
Battery saving settings:
1. Turn on the infrared port only if necessary - you can assign one of the programmable keys (8-4-1 or 2)
2. CB can be configured to read using one of the programmable keys (8-4-1 or 2)
3. Use backlight only when necessary (8-5-2)
4. Avoid constantly turning the phone off and then registering on the network
5. Use the vibrator only when necessary. Don't use the vibrator all the time
. 6. Disable automatic network registration (6-3)
7. The battery in the S25 is rather weak. To conserve energy, set s25 to automatically turn off every evening. You can safely turn on your phone in the morning. This option is located in the menu under the clock.
8. Temporarily turn off the backlight of the display (the keypad lock must be activated), just press the End call button (with the image of a red phone).
How can I quickly turn off the vibration alert?
The fastest way is to put the phone in professional mode (expert mode, see the instructions) and then press three keys in sequence - Menu - 3 - 5 to turn the vibration alert on or off.
______________________________________________________________________________________________________________________________
Useful Codes:
All Samsung models
*#06# IMEI number
*#9998*228# -> Battery status (capacity, voltage, temperature) *#9999# -> Shows software version
*#9998*289# -> Change ringer frequency
*#9998*523# -> Change display contrast
*#9998*842# -> Vibrator test
*2767*3855# -> Full reset l EEPROM ( This code removes SP lock!! ) But also changes IMEI to 447967-89-400044-0, To restore your old IMEI, use the appropriate software (at your own risk)
*2767*2878# -> Custom reset EEEPROM